Glitter Patterns (Textured) - Blue/Black Snake Skin - A4 sheet
Glitter Patterns (Textured) - Blue/Black Snake Skin - A4 sheet
Share
Suitable Materials
Suitable Materials
You can apply the vinyl to most flat and curved surfaces such as
✪ Ceramic
✪ Glass
✪ Wood
✪ Metal
✪ Plastic
✪ Mirror
Craft Machine Settings
Craft Machine Settings
*** PLEASE NOTE :- Cut settings can differ from each machine, blade and vinyl type. Updates to your machine can also effect cut settings. Always perform a test cut before cutting a full design even if you've cut the material before ***
✂ Cricut
- Premium Vinyl Textured
✂ Silhouette
- Blade 2 / Speed 7 / Thickness (Force) 5
Recommended Application Tape
Recommended Application Tape
Strong Tack Application Tape - Yellow Grid
How to Apply
How to Apply
Step 1 - Clean the area you are applying to thoroughly
Clean the area thoroughly with isopropyl alcohol or soap and water. Do not use Windex or similar products because it will leave a residue behind that will prevent the decal from adhering well.
Step 2 - Prepare the decal for application
Prepare the decal for application by applying transfer tape and then firmly rub a squeegee or credit card across the clear transfer tape. This removes any air bubbles that may have formed and makes the decal cling to the transfer tape.
Step 3 - Peel the white paper backing off
Peel the white paper backing off the decal. If any part of the decal clings to the backing, slowly replace the paper backing and repeat Step 2.
Step 4 - Lower the decal onto the surface CAREFULLY
Slowly lower the decal onto the surface and rub it in place firmly with a squeegee or credit card. Remember the decal will not come back of without damaging the decal.
Step 5 - Slowly peel the clear transfer tape off
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If decal pulls away from the surface repeat Step 4.
** Use a pin to poke any air bubbles in the centre and push the air out through the hole.
** For best results do not apply a decal in extreme hot or cold temperatures.
Washing Instructions
Washing Instructions
✪ Wait 24h before first wash
✪ Hand wash only with warm water
✪ Do not leave to soak in water
✪ Do not wash in a dishwasher
✪ Towel dry
✪ Do not use aggressive chemical agents
REQUIRES A STRONG TACK APPLICATION TAPE
Our Textured Glitter range is a semi-permanent self-adhesive vinyl. It is easy to cut and can be used for indoor and outdoor decoration. It is the perfect way to add your favorite quotes and designs directly onto any surface and the best of all, this vinyl film removes cleanly and easily for up to 1-3 years after application and has a matte surface that suppresses unwanted reflection. It's an ideal choice for temporary and short-term indoor graphics.
Due to the textured finish, a strong application tape is require
*** We have tried our best to get an accurate reflection of each colour, however due to monitor differences, actual colours may differ slightly. Also colour shades may change from batch to batch due to the manufacturing process. ***