20oz/600ml Sublimation UV Colour Changing Stainless Steel Skinny Tumbler - White to Purple

✪ Time: 1 minutes

✪ Temperature: 180C (356F)

✪ Medium pressure

Hover transfer under open heat press for 10 seconds to dry excess moisture.

1. Secure transfer to the Ceramic Mug using Heat Tape.

2. Top with protective paper, taking care not to extend the paper well above or below the top and bottom of the mug.

3. Place Ceramic Mug in Mug Press and close the heating element around the mug.

4. Press according to time, temperature, and pressure above.

5. Remove any paper residue with a soft wet cloth or dish sponge.

Application notes:

The typical imaging area for a mug is 1.25” in from the handle and .25” from the top and bottom sides of the mug.

Place heat tape on the transfer edges closest to the handle that does not have sublimation ink on it after you have aligned the image on the mug. Use heat tape to attach the transfer to the mug taking care not to cover any of the imaging area.

✪ Time: 6 minutes

✪ Temperature: 195°c

1. Secure transfer to the Ceramic Mug using Heat Tape.

2. Wrap and secure heat tape, over transfer, to the Ceramic Mug. Take care to ensure the transfer is not wrinkled under the wrap.

3. Place in 400° preheated oven for 15 minutes.

4. Remove mug from oven and immediately remove transfer and wrap and allow to cool

✪ Wait 24h before first wash

✪ Hand Wash Only